Operation Manual

7
Chapter 1
Get to Know About Your Modem Router
LED Explanation
Name Status
Indication
Power
On System initialization complete.
Flashing
System initializing or firmware upgrading is in process. Do not
disconnect or power off the modem router.
Off Power is off.
ADSL
On ADSL line is synchronized and ready to use.
Flashing The ADSL negotiation is in progress.
Off ADSL synchronization failed.
Internet
On Internet connection is available.
Off
No Internet connection or the modem router is operating in
Bridge mode.
Wireless 2.4Ghz
On The 2.4GHz wireless radio band is enabled.
Off The 2.4GHz wireless radio band is disabled.
Wireless 5Ghz
On The 5GHz wireless radio band is enabled.
Off The 5GHz wireless radio band is disabled.
WPS
On/Off
Turns on when a WPS synchronization is established and
automatically turns Off about five minutes later.
Slow
Flashing
A wireless device is trying to connect to the network via WPS.
This process may take up to 2 minutes.
LAN
On At least one LAN port is connected.
Off No LAN port is connected.
USB
On The USB device is identified and ready to use.
Flashing The USB device is being identified.
Off No USB device is plugged into the USB port.
Note:
1. If the ADSL LED is off, please check your Internet connection first. Refer to Connect Your Modem Router for more
information about how to make Internet connection correctly. If you have already made a right connection,
please contact your ISP to make sure your Internet service is available now.
2. If the Internet LED is off, please check your ADSL LED first. If your ADSL LED is also off, please refer to Note 1. If your
ADSL LED is ON, please check your Internet configuration. You may need to check this part of information with
your ISP and make sure everything have been input correctly.