Installation Manual

a. Turn o your computer, unplug the

power cable and remove the case

panel.

1 Connect to a Computer

Note:

If the bracket is not suitable for your computer, detach it from

the adapter's board and replace it with the low-prole bracket.

b. Locate an available PCI-E slot and carefully

insert the adapter.

c. Connect the antenna to the adapter.

d. Replace the case panel, plug in the power

cable and turn on your computer.

PAGE 1
Connect to a Computer a. Turn off your computer, unplug the power cable and remove the case panel. b. Locate an available PCI-E slot and carefully insert the adapter. Note: If the bracket is not suitable for your computer, detach it from the adapter's board and replace it with the low-profile bracket. c. Connect the antenna to the adapter. d. Replace the case panel, plug in the power cable and turn on your computer.
PAGE 2
Install Driver a. Insert the CD and run the Autorun.exe. Note: You can also download the driver and check the new release at https://www.tp-link.com/download-center b. Select your adapter and follow the instructions to complete the installation. Note: If you can’t install the driver successfully, disable the antivirus software and firewall, then try again. 3 Join a Wireless Network a. Click the network icon ( taskbar. or ) on the b.