Operation Manual

6
Chapter 1 Get to Know About Your Modem Router
Name Status
Indication
Power
On System initialization complete.
Flashing
System initializing or firmware upgrading is in process. Do not
disconnect or power off the modem router.
Off
Power is off. Please ensure that the power adapter is
connected correctly.
DSL
On DSL line is synchronized and ready to use.
Flashing The DSL negotiation is in progress.
Off
DSL synchronization failed. Please refer to Note 1 for
troubleshooting.
Internet
On The network is available with a successful Internet connection.
Off
There is no successful Internet connection or the modem
router is operating in Bridge mode. Please refer to Note 2 for
troubleshooting.
Wireless 2.4GHz
On The wireless 2.4GHz band is working properly.
Off The wireless 2.4 GHz band is disabled.
Wireless 5GHz
On The wireless 5GHz band is working properly.
Off The wireless 5GHz band is disabled.
LAN
On At least one LAN port is connected.
Off No LAN port is connected.
USB
On The USB device is identified and ready to use.
Flashing The USB device is being identified.
Off No USB device is plugged into the USB port.
WPS
On/Off
Turns On when a WPS synchronization is established and
automatically turns Off about five minutes later.
Flashing
A wireless device is trying to connect to the network via WPS.
This process may takes about 2 minutes.
Note:
1. If the DSL LED is off, please check your Internet connection first. Refer to Connect Your Modem Router for more
information about how to make Internet connection correctly. If you have already made a right connection,
please contact your ISP to make sure your Internet service is available now.
2. If the Internet LED is off, please check your DSL LED first. If your DSL LED is also off, please refer to Note 1. If your
DSL LED is ON, please check your Internet configuration. You may need to check this part of information with
your ISP and make sure everything have been input correctly.