Operation Manual

100
• Change a web browser or computer and log in again.
• Reset the modem router to factory default settings: With the modem router
powered on, press and hold down the Reset button on the side panel of the modem
router for 8 seconds until all LEDs turn off on momentarily, then release the button.
Note: You’ll need to reconfigure the modem router to surf the Internet once the modem router is reset.
Open a web browser and log in again. If login fails, please contact the technical
support.
T4. What can I do if I cannot access the Internet?
1. Check to see if all the connectors are connected well, including the telephone line,
Ethernet cables and power adapter.
2. Check to see if you can log in to the web management page of the modem router.
If you can, try the following steps. If you cannot, please set your computer referring
to T3 and then try to see if you can access the Internet. If the problem persists,
please go to the next step.
3. Consult your ISP and make sure all the VPI/VCI, Connection Type, account username
and password are correct. If there are any mistakes, please correct the settings and
try again.
4. Refer to T5 to clone the MAC address.