Operation Manual

Chapter 2

Connect the Hardware

2. Connect your computer to the modem router.

Method 1: Wired

Connect your computer’s Ethernet port to the LAN port on the modem router via the

Ethernet cable.

Method 2: Wirelessly

Use the default SSID (Wireless Network Name) and Wireless Password printed on the

product label of the modem router to connect wirelessly.

Method 3: Use the WPS button

Wireless devices that support WPS, including Android phones, tablets, most USB

network cards, can be connected to your router through this method. (WPS is not

supported by iOS devices.)

Note:

The WPS function cannot be configured if the wireless function of the modem router is disabled. Also, the WPS

function will be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is

configured with the appropriate encryption before configuring the WPS.

1 ) Tab the WPS icon on the device’s screen.

2 ) Immediately press the WPS button on your modem router.

3 ) The WPS LED flashes for about two minutes during the WPS process.

4 ) When the WPS LED is on, the client device has successfully connected to the

modem router.