User Manual
Table Of Contents
- About This Guide
- Get to Know Your Modem Router
- Connect the Hardware
- Log In to Your Modem Router
- Set Up Internet Connections
- TP-Link Cloud Service
- OneMeshTM with Seamless Roaming
- IPTV
- Guest Network
- USB Settings
- Parental Controls
- QoS
- Network Security
- NAT Forwarding
- VPN Server
- Specify Your Network Settings
- Administrate Your Network
- 16. 1. Set System Time
- 16. 2. Control LEDs
- 16. 3. Update the Firmware
- 16. 4. Back up and Restore Configuration Settings
- 16. 5. Reboot the Modem Router
- 16. 6. Change the Administrator Account
- 16. 7. Local Management
- 16. 8. Remote Management
- 16. 9. System Log
- 16. 10. Monitor the Internet Traffic Statistics
- 16. 11. CWMP Settings
- 16. 12. SNMP Settings
- Appendix: Troubleshooting
110
Chapter 16
Administrate Your Network
• CWMP: Toggle On to enable the CWMP (CPE WAN Management Protocol) feature.
• Inform: Enable this feature to send an Inform message to the ACS (Auto Configuration
Server) periodically.
•
Inform Interval: Enter the time interval in seconds when the Inform message will be
sent to the ACS.
•
ACS URL: Enter the web address of the ACS which is provided by your ISP.
• ACS Username/Password: Enter the username/password to log in to the ACS server.
• Interface used by TR-069 client: Select which interface to be used by the TR-069
client.
•
Display SOAP messages on serial console: Toggle to enable or disable this feature.
• Connection Request Authentication: Select this check box to enable authentication
for the connection request.
•
Username/Password: Enter the username/password for the ACS server to log in to
the router.
•
Path: Enter the path for the ACS server to log in to the router.
• Port: Enter the port that connects to the ACS server.
• URL: Enter the URL that connects to the ACS server.