Operation Manual

4
Chapter 1
Get to Know About Your Modem Router
LED Status
Indication
Power
On System initialization complete.
Flashing
System initializing or firmware upgrading is in process. Do not
disconnect or power off the modem router.
Off
Power is off. Please ensure that the power adapter is
connected correctly.
DSL
On DSL synchronization is established.
Flashing DSL synchronization is in progress.
Off
DSL synchronization failed. Please refer to
Note 1 for
troubleshooting.
Internet
On The network is available with a successful Internet connection.
Off
No successful Internet connection is available, or the modem
router is operating in Bridge mode. Please refer to
Note 2 for
troubleshooting.
Wireless 2.4GHz
On The wireless 2.4GHz band is working properly.
Off The wireless 2.4GHz band is disabled.
Wireless 5GHz
On The wireless 5GHz band is working properly.
Off The wireless 5GHz band is disabled.
LAN
On At least one LAN port is connected.
Off No LAN port is connected.
USB
On USB device is identified.
Flashing USB device identification is in progress.
Off USB device is unplugged or identification failed.
WPS
On/Off
Turns On when a WPS synchronization is established and
automatically turns Off about five minutes later.
Flashing
A wireless device is trying to connect to the network via WPS.
This process may take about 2 minutes.
Note:
1. If the DSL LED is off, check your Internet connection first. Refer to Connect Your Modem Router for more information
about how to make Internet connection correctly. If you have already made a right connection, contact your ISP
to make sure your Internet service is available now.
2. If the Internet LED is off, check your DSL LED first. If your DSL LED is also off, please refer to Note 1. If your DSL LED
is ON, check your Internet configuration. You may need to check this part of information with your ISP and make
sure everything have been input correctly.