User Manual
Table Of Contents
- About This Guide
- Get to Know Your Modem Router
- Connect the Hardware
- Log In to Your Modem Router
- Set Up Internet Connections
- TP-Link Cloud Service
- IPTV
- Guest Network
- Parental Controls
- Bandwidth Control
- Network Security
- NAT Forwarding
- VPN Server
- Specify Your Network Settings
- Administrate Your Network
- Appendix: Troubleshooting
23
Chapter 6
IPTV
Configure the modem router to enable Internet Protocol
Television (IPTV) Services.
For example, I already bought IPTV service, but this service
can only be delivered through the Internet. Therefore, I need to
configure my modem router first.
1. Visit
http://tplinkmodem.net, and log in with your TP-Link ID
or the password you set for the router.
2. Go to
Advanced > IPTV to open the configuration page.
3. Click Enable IPTV to enable this function.
4. Select your DSL modulation type.
5. If you select
VDSL modulation type, check to enable VLAN
ID and set the ID and priority. If you select
ADSL, fill in PVC
parameters (
VPI and VCI). VLAN and PVC parameters are all
provided by your IPTV service provider.
6. Select a
Connection Type from the drop-down list according
to your IPTV connection. If you select
Bridge, specify a LAN
port for the IPTV connection and connect the set-top box to
this port.
7. Click
Save to make the settings effective.
Modem router configuration is complete! You may still need to
configure settings on your set-top box before enjoying your
IPTV service.
I want to:
How can I
do that?
Done!