User Manual
Table Of Contents
- About This Guide
- Get to Know Your Modem Router
- Connect the Hardware
- Log In to Your Modem Router
- Set Up Internet Connections
- TP-Link Cloud Service
- IPTV
- Guest Network
- Parental Controls
- Bandwidth Control
- Network Security
- NAT Forwarding
- VPN Server
- Specify Your Network Settings
- Administrate Your Network
- Appendix: Troubleshooting
26
Chapter 7
Guest Network
2. Go to Advanced > Guest Network.
3. Assign network authorities and bandwidth according to your needs.
• Allow Guests to Access Each Other
Select this check box to allow the clients in your guest network to access each
other’s files.
•
Allow Guests to Access My Local Network
Select this check box to allow the clients in your guest network to access your local
network, not just the internet.
•
Enable guest network bandwidth control
Select this check box to assign the upstream bandwidth and downstream bandwidth
for the guest network. This option is available only when Bandwidth Control is
enabled on the
Advanced > Bandwidth Control page.
4. Click Save. Now users in your guest network can enjoy only the network authorities
and bandwidth you assigned!
Tips:
To view guest network information, go to Advanced > Status and find the Guest Network section.