User Manual
Table Of Contents
- About This Guide
- Get to Know Your Modem Router
- Connect the Hardware
- Log In to Your Modem Router
- Set Up Internet Connections
- TP-Link Cloud Service
- IPTV
- Guest Network
- Parental Controls
- Bandwidth Control
- Network Security
- NAT Forwarding
- VPN Server
- Specify Your Network Settings
- Administrate Your Network
- Appendix: Troubleshooting
37
Chapter 10
Network Security
5. Select a Service Type from the drop-down list and the following four fields will be
auto-populated. Select
Custom when your desired service type is not listed, and
enter the information manually.
6. Specify the IP address(es) that this filtering rule will apply to.
7. Click
Save.
Note: If you want to disable this entry, click the icon.
10. 3. Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
Block or allow specific client devices to access my network (via
wired or wireless).
1. Visit
http://tplinkmodem.net, and log in with your TP-Link ID
or the password you set for the router.
2. Go to
Advanced > Security > Access Control and enable
Access Control.
I want to:
How can I
do that?