User Manual
Table Of Contents
- About This Guide
- Get to Know Your Modem Router
- Connect the Hardware
- Log In to Your Modem Router
- Set Up Internet Connections
- TP-Link Cloud Service
- IPTV
- Guest Network
- Parental Controls
- Bandwidth Control
- Network Security
- NAT Forwarding
- VPN Server
- Specify Your Network Settings
- Administrate Your Network
- Appendix: Troubleshooting
51
Chapter 12
VPN Server
3 ) In the IPSec Connection Name column, specify a name.
4 ) In the
Remote IPSec Gateway (URL) column, Enter Site B’s WAN IP address.
5 ) Configure
Site A’s LAN.
In the
Tunnel access from local IP addresses column, we take Subnet Address
as an example. Input the LAN IP range of Site A in the
IP Address for VPN column,
and input
Subnet Mask of Site A.
6 ) Configure
Site B’s LAN.
In the
Tunnel access from remote IP addresses column, we take Subnet
Address
as an example. Input the LAN IP range of Site B in the IP Address for
VPN
column, and input Subnet Mask of Site B.
7 ) Select the
Key Exchange Method for the policy. We select Auto(IKE) here.