User Manual

58
Chapter 13
Specify Your Network Settings
13. 2. 1. Configure the RADVD Address Type
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to
Advanced > Network > LAN Settings.
3. Select IPv6 to configure IPv6 LAN parameters.
Note:
If you have created an interface group, you can configure IPv6 LAN settings for the default interface group only.
1 ) Select the RADVD address type to make the modem router assign IPv6 address
prefixes to hosts.
Note:
Do not select the Enable RDNSS and Enable ULA Prefix check boxes unless required by your ISP. Otherwise
you may not be able to access the IPv6 network. For more information about RDNSS and ULA Prefix, contact
our technical support.
2 ) Keep Site Prefix Type as the default value Delegated. If your ISP has provided a
specific IPv6 site prefix, select
Static and enter the prefix.
3 ) Keep
Prefix Delegated WAN Connection as the default value.
4. Click Save to make the settings effective.
13. 2. 2. Configure the DHCPv6 Server Address Type
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to
Advanced > Network > LAN Settings.
3. Select
IPv6 to configure IPv6 LAN parameters.
Note:
If you have created an interface group, you can configure IPv6 LAN settings for the default interface group only.