User Manual
Table Of Contents
- About This Guide
- Get to Know Your Modem Router
- Connect the Hardware
- Log In to Your Modem Router
- Set Up Internet Connections
- TP-Link Cloud Service
- IPTV
- Guest Network
- Parental Controls
- Bandwidth Control
- Network Security
- NAT Forwarding
- VPN Server
- Specify Your Network Settings
- Administrate Your Network
- Appendix: Troubleshooting
59
Chapter 13
Specify Your Network Settings
1 ) Select the DHCPv6 Server address type to make the modem router assign
IPv6 addresses to hosts.
2 ) Specify the
Start/End IPv6 Address for the IPv6 suffixes. The modem router will
generate IPv6 addresses within the specified range.
3 ) Keep
Leased Time as the default value.
4 ) Keep
Site Prefix Type as the default value Delegated. If your ISP has provided a
specific IPv6 site prefix, select
Static and enter the prefix.
5 ) Keep
Prefix Delegated WAN Connection as the default value.
4. Click
Save to make the settings effective.
13. 3. Wireless Settings
13. 3. 1. Specify Basic Wireless Settings
The modem router’s wireless network name (SSID) and password, and security option
are preset in the factory. The preset SSID and password can be found on the product
label. You can customize the wireless settings according to your needs.
Visit
http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for
the router. Go to
Basic > Wireless page.