User Manual
Table Of Contents
- About This Guide
- Get to Know Your Modem Router
- Connect the Hardware
- Log In to Your Modem Router
- Set Up Internet Connections
- TP-Link Cloud Service
- IPTV
- Guest Network
- Parental Controls
- Bandwidth Control
- Network Security
- NAT Forwarding
- VPN Server
- Specify Your Network Settings
- Administrate Your Network
- Appendix: Troubleshooting
84
Chapter 14
Administrate Your Network
• SNMP Agent for WAN: Toggle On to allow management from the WAN side using
SNMP.
•
Read-only Community: Displays the default public community string that protects the
router from unauthorized access.
•
Write Community: Displays the default write community string that protects the router
from unauthorized changes.
•
System Name: Displays the administratively-assigned name for this managed device.
• System Description: Displays the textual description of the managed device. This
value should include the full name and version identification of the system’s hardware
type, software operating-system, and networking software.
•
System Location: Displays the physical location of this device (for example, the
telephone closet, 3rd floor).
•
System Contact: Displays the textual identification of the contact person for this
managed device, together with information on how to contact this person.
•
Trap Manager IP: Displays the IP address of the host to receive the traps.
You are suggested to keep the default settings. Click
Save to make the settings effective.