Operation Manual

5
Chapter 1 Get to Know About Your Modem Router
1. 2. 2. Ports
The modem router’s back panel and side panel show the connection ports and
antennas. Refer to the following for detailed instructions.
Item
Description
FON1/FON2
For connecting your analog phone to the modem router. Connect your
analog phones to the TAE ports on the side panel or RJ11 ports on the back
panel. Note that you can only connect to two ports (one to a FON1 and the
other to a FON2) at most.
DSL
For connecting the modem router to the Internet. Connect the port to the
splitter or directly connect the port to the phone jack via a phone cable. For
details, please refer to Connect Your Modem Router.
USB1/USB2 For connecting to a USB storage device or a USB printer.
LAN1, LAN2, LAN3,
LAN4/WAN
For connecting to your PCs or other Ethernet network devices.
In wireless router mode, the LAN4/WAN port is used for connecting to a
Cable/FTTH/VDSL/ADSL device.
Power
For connecting the modem router to power socket via the provided power
adapter.
Antennas
Used for wireless operation and data transmission. For the best WiFi
performance, we recommends that the outside two antennas be outward at
about 30 degrees.