Operation Manual

19
Chapter 5 VoIP
5. 1. Connecting the Telephone
Connect your telephone to the TAE ports on the side panel or RJ11 ports on the back
panel. Please note that you can only connect to two ports (one to a FON 1 and the other
to a FON 2) at most.
RJ-11
TAE
FON 2FON 1
5. 2. DECT
The modem router is integrated with DECT (Digital Enhanced Cordless
Telecommunications) function. With this function enabled, you can register your
cordless phone on the modem router and make calls via Internet.
5. 2. 1. Registering DECT Handset
There are two ways to register your DECT handset.
Method 1: Via DECT Button
1. Set your DECT handse in the registration mode, and then press and hold the DECT
button on the DSL router for about 3 seconds until the Phone LED flashes.
DECT
DECT
DECTWLANWPSResetPower On/Off
Within 1 minute Press for 3 seconds Blinking