User's Guide

63
Chapter 12
Customize Your Network Settings
12. 3. Configure to Support IPTV Service
I want to:
Configure IPTV setup to enable Internet/IPTV/Phone service provided by my internet
service provider (ISP).
How can I do that?
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced > Network > IPTV.
3. If your ISP provides the networking service based on IGMP technology, for
example, British Telecom(BT) and Talk Talk in UK:
1 ) Check the box for IGMP Proxy and select the
IGMP Version, either V2 or V3, as
required by your ISP.
2 ) Click Save.
3 ) After configuring IGMP proxy, IPTV can work behind your router now. You can
connect your set-top box to any of the router’s Ethernet port.
If IGMP is not the technology your ISP applies to provide IPTV service:
1 ) Tick
Enable to enable IPTV.
2 ) Select the appropriate
Mode according to your ISP.
• Select
Bridge if your ISP is not listed and no other parameters are required.
• Select
Custom if your ISP is not listed but provides necessary parameters.