User's Guide

70
Chapter 12
Customize Your Network Settings
The smart connect function lets you to enjoy a more high-speed network by assigning
your devices to best wireless bands based on actual conditions to balance network
demands.
1. Go to
Advanced > Wireless > Wireless Settings.
2. Enable
Smart Connect.
3. Keep the default or set a new SSID and password, and click
Save. This SSID and
password will be applied both for 2.4GHz and 5GHz wireless networks.
• To change the security option:
1. Go to
Advanced > Wireless > Wireless Settings.
2. Select the wireless network
2.4GHz or 5GHz.
3. Select an option from the
Security drop-down list. We recommend you don’t change
the default settings unless necessary. If you select other options, configure the
related parameters according to the help page.
In addition
•
Mode - Select a transmission mode according to your wireless client devices. It is
recommended to just leave it as default.
•
Channel Width - Select a channel width (bandwidth) for the wireless network.
•
Channel - Select an operating channel for the wireless network. It is recommended
to leave the channel to
Auto, if you are not experiencing the intermittent wireless
connection issue.