User's Guide

Chapter 13

Manage the Router

3. Select the correct End date and time when daylight saving time ends at your local

time zone.

4. Click

Save.

13. 2. Control LEDs

The router‘s LEDs indicate router’s activities and status. You can turn on or turn off the

LEDs either from the web management page or by pressing the LED button.

1. Visit

http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for

the router.

2. Go to

Advanced > System Tools > LED Control.

• To control LED:

Toggle on

LED Status to turn on the LED while toggle off to turn off the LED.

• To enable Night Mode:

1. Tick the

Night Mode checkbox.

2. Specify a time period in the

LED Off Time as needed, and the LEDs will be off during

this period.

3. Click Save.

13. 3. Test the Network Connectivity

Diagnostics is used to test the connectivity between the router and the host or other

network devices.