User's Guide

Chapter 4

Configure the Router in Wireless Router Mode

4. 8. ALG (Application Layer Gateway)

View your ALG (Application Layer Gateway) settings in this page. It is recommended to

keep them as default.

4. 9. IPv6

This function allows you to enable IPv6 function and set up the parameters of the

router’s Wide Area Network (WAN) and Local Area Network (LAN).

4. 9. 1. IPv6 Status

1. Visit http://tplinkwifi.net, and log in with the password you set for the router.

2. Go to

Advanced > IPv6, and you can view the current IPv6 status information of the

router.

3. Enable IPv6 and select the mode: Router or Pass-Through (Bridge).

• If you select

Router:

Fill in WAN and LAN information as required by different connection types.

1. Normal: The default connection type.

1 ) Configure the WAN settings.