User's Guide

58
Chapter 4 Configure the Router in Wireless Router Mode
4. 10. 5. Remote Management
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
Advanced > System > Administration, and focus on the Remote Management
section.
Note:
If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), you cannot use this feature because
private addresses are not routable.
• Forbid all devices to manage the router remotely:
Do not tick the
Enable checkbox of Remote Management.
• Allow all devices to manage the router remotely:
1. Tick the Enable checkbox of Remote Management.
2. Keep the HTTP port as default setting (recommended) or enter a value between 1024
and 65535.
3. Select
All Devices for Remote Managers.
4. Click
SAVE.
Devices on the internet can log in to
http://Router’s WAN IP address: port number (such
as
http://113.116.60.229:1024) to manage the router.
Tips:
• You can find the WAN IP address of the router on Network Map > Internet.