User's Guide

59
Chapter 4 Configure the Router in Wireless Router Mode
• The router’s WAN IP is usually a dynamic IP. Please refer to Dynamic DNS if you want to log in to the router through
a domain name.
• Allow a specific device to manage the router remotely:
1. Tick the Enable checkbox of Remote Management.
2. Keep the HTTP port as default setting (recommended) or enter a value between 1024
and 65535.
3. Select
Specified Device for Remote Managers.
4. In the
Only this IP Address field, enter the IP address of the remote device to manage
the router.
5. Click
SAVE.
Devices using this WAN IP can manage the router by logging in to
http://Router’s WAN
IP:port number
(such as http://113.116.60.229:1024).
Tips: The router’s WAN IP is usually a dynamic IP. Please refer to Dynamic DNS if you want to log in to the router
through a domain name.
4. 10. 6. System Log
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
Advanced > System > System Log, and you can view the logs of the router.