User Guide

1
English
*Mount your camera according to the diagrams in the opening chapter of this guide.
Use Your Camera with an NVR
The camera works with an NVR for easier batch access and management. Here we use a VIGI
NVR as an example.
Network Camera
Network Device
(e.g., Switch or Router)
VIGI NVR
Monitor
Network Camera
1
Connect your cameras to the same network as your NVR (as shown above).
2
Power on your cameras with the PoE power supply or an external power supply.
Note: The camera’s standard power supply is 12V DC or PoE (802.3af/at). The power source should meet
LPS or PS2 requirements according to IEC 62368-1.
3
Add your cameras with the NVR.