Installation Instructions
12
Congure the Client
1. Log in to PharOS
2. Go to the Quick Setup page
3. Operation Mode
• Select 'Client'.
• Click 'Next'.
4. LAN Settings
• IP Address: 192.168.0.2 (in the same subnet with the Access Point)
• Click 'Next'.
5. Wireless Client Settings
• SSID of Remote AP: click 'Survey', select the SSID of the Access Point,
and click 'Connect'.
• Security: select 'WPA-PSK/WPA2-PSK'.
• PSK Password: enter the password of the Access Point.
• Distance Setting: enter the same number with the Access Point.
• Click 'Next'.
6. Finsh: Click 'Finish'.