Installation Instructions
13
• Point-to-Multipoint
Congure the Access Point (a typical conguration for
Internet Service Provider):
Point-to-Multipoint application is used to serve Internet access for
multiple locations from a single Access Point. There are many types of
congurations to provide this service. Here we introduce the ISP-style
(Internet Service Provider along with subscribers) Point-to-Multipoint
application, as shown in the gure below.
1. Log in to PharOS
2. Go to the Quick Setup page
3. Operation Mode
• Select 'Access Point'.
• Click 'Next'.
Refer to the following steps to congure the CPEs.
Router
LAN: 192.168.7.1
Internet
Access Point
LAN: 192.168.7.2
AP Client Router
LAN: 192.168.0.254
WAN: Dynamic IP
AP Client Router
LAN: 192.168.0.254
WAN: Dynamic IP
AP Client Router
LAN: 192.168.0.254
WAN: Dynamic IP
When making the conguration for the CPE of the subscribers, please
contact the ISP for related information, as the conguration may vary due
to dierent ISPs.