Installation Instructions

15
• Hotspot
Hotspot application is used to provide Internet access for wireless
devices such as smartphones, tablets and laptops.
If the CPE is connected to a router, we recommend setting it in the
Access Point mode.
1. Log in to PharOS
2. Go to the Quick Setup page
3. Operation Mode
• Select 'Access Point'.
• Click 'Next'.
4. LAN Settings: Click 'Next'.
5. WAN AP Settings
• SSID: customize the name for the network as you like.
• Security: select 'WPA-PSK/WPA2-PSK'.
• PSK Password: create the password for the network as you like.
• Click 'Next'.
6. Finish: Click 'Finish'.
Refer to the following steps to congure the CPE.
Congure the Access Point
Router Access Point
Smartphone
Laptop
Tablet
Internet