Installation Instructions

16
If the CPE is connected to a Modem, we recommend setting it in the
AP Router mode.
1. Log in to PharOS
2. Go to the Quick Setup page
3. Operation Mode
• Select 'AP Router'.
• Click 'Next'.
4. WAN Connection Type
*These settings may vary depending on the ISP. Please contact
your ISP for the correct information.
• Select 'Dynamic IP'.
• Click 'Next'.
5. Wireless AP Settings
• SSID: enter the name for the network as you like.
• Security: select 'WPA-PSK/WPA2-PSK'.
• PSK Password: enter the password for the network as you like.
• Click 'Next'.
6. Finsh: Click 'Finish'.
Refer to the following steps to congure the CPE.
Congure the AP Router (equal to a SOHO router)
Modem
Smartphone
Laptop
Tablet
AP Router
Internet