Whole Home Mesh Wi-Fi System Seamless Roaming | Parental Controls | Easy Setup User Guide AC1200 Whole Home Mesh Wi-Fi System 1910013031 REV3.0.
Contents About This Guide····················································· 1 Blacklist·······································································19 Set Up Your Deco···················································· 3 WPS···············································································21 Appearance································································ 2 Add More Decos······················································ 7 Dashboard······························
About This Guide This guide provides a brief introduction to Deco Whole Home Mesh Wi-Fi System and the Deco app, as well as regulatory information. Features available in Deco may vary by model and software version. Deco availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Deco experience.
Appearance Each Deco has an LED that changes color according to its status, two RJ-45 Ethernet ports, a power slot, and a Reset button. See the explanation below: Tip: The product label can be found at the bottom of the product. Yellow pulse: Deco is resetting. Yellow solid: Deco is starting up. Blue pulse: Deco is ready for setup. Blue solid: Deco is setting up. White pulse: Deco is upgrading firmware. White solid: Deco is registered and all is well. Red pulse: Deco is disconnected from main Deco.
Set Up Your Deco The intuitive Deco app guides you through an easy setup process that gets each unit up and running and all your devices connected and online. Follow the steps below to set up your Deco Whole Home Mesh Wi-Fi System. 1. Download and install the Deco app Scan the QR code below or go to Google Play or the App Store to download the Deco app. Install the app on your Android or iOS smartphone or tablet. 2. Log in with TP-Link ID Open the app. Use your TP-Link ID to log in.
4. Plug in and power on Deco Power off your modem. Connect your Deco to the modem and power them both on. If you don't have a modem, connect the Ethernet outlet directly to your Deco. 5. Connect to the Deco's Wi-Fi Wait until the Wi-Fi Signal LED pulses blue, then connect to the Deco's Wi-Fi using the default SSID printed on the product label. 6. Select a location Select a location for this Deco. If its location is not listed, you can create a new one by choosing Custom.
. Set up internet connection Select the internet connection type and enter the information. If you are not sure, contact your internet service provider. 8. Create your Wi-Fi network Set a network name and a password. These will be the name and password you use to connect your devices to Wi-Fi. 9. Connect to your Wi-Fi network Connect your phone/tablet to the Deco's new Wi-Fi.
10. Setup complete Your Deco network is now up. Connect all devices to the Deco network. You can also add more Deco units to expand the Wi-Fi coverage.
Add More Decos After created a Deco network, you can add more Deco units to the network to expand the Wi-Fi coverage and manage them easily on your Deco app. In Overview, tap . Select the Deco model you want to add, and follow app instructions to complete the setup. After the setup, you can find the added Deco units by tapping Overview.
Dashboard After you successfully set up your Deco network, you will see the dashboard of the Deco app. Here you can get an overview of the network status, check the connected clients, and configure more advanced features.
Check Deco Status In Overview, you can check the working status of all the Decos, check the details of each Deco unit, change the Deco's location/name, and more. 1. Tap to check all Decos' status. 2. Tap a Deco unit to check the details. 3. Change or customize the location/name of the Deco.
Set Main Deco After setup, you can replace the main Deco with any satellite Deco without resetting and reconfigure the whole network. 1. In Overview, tap . 2. Tap > Set Main Deco. 3. Choose a satellite Deco and follow app instructions to complete the settings.
Manage Connected Devices In Overview, you can check the working status of all the connected devices, view the device details, and change the device settings. 1. Tap a client to check the details. 2. Tap to manage the device settings. 3. Tap Belongs to to add a unique profile for the device and manage its online activities.
Remove/Reboot Deco You can remove or reboot your Deco easily in the Deco app. Follow the steps below. Note: Removing a Deco will reset it to factory default settings. You can also press the Reset button at the bottom of Deco for 1 second and release to quickly reset your Deco to factory default settings. 1. In Overview, tap . 2. Select a Deco unit. 3. Tap to remove or reboot the Deco.
Create A New Network In the Deco app, you can create different Deco networks linked with your TP-Link ID and manage them conveniently from the Deco app with one account. You can also help family or friends manage their network on your Deco app. Two methods are provided as below to create a new network: Method 1. Create a new network from the Overview page 1. Tap > Create New Network. 2. Then follow the app instructions to complete the setup.
Method 2. Create a new network from the Menu page 1. Tap to open the Menu. 2. Tap > CREATE NEW NETWORK. 3. Follow app instruction to complete the setup.
Delete A Network You can delete a Deco network if you don't need it anymore. Deleting a Deco network will reset all Decos in this network to factory default settings. 1. In Overview, tap . 2. Tap > Delete.
Wi-Fi Settings You can change the network name and password of your main network at any time and share the network easily with family and friends. Tap > Wi-Fi. Manage main network (eg. change your main network's Wi-Fi name and password). Share your network with others.
Guest Network You can create and share a separate network for guests to guarantee the security and privacy of your main network. Tap > Wi-Fi and enable Guest Network. Set a Wi-Fi name and password for the guest network. Share your guest network with others.
Network Optimization Network Optimization lets your Deco intelligently scan for a clearer channel and switch your devices to it, ensuring optimal Wi-Fi performance. 1. Tap > Network Optimization. 2. The app will scan the network automatically. 3. Optimize your network for optimal Wi-Fi performance. 4. Enjoy your time if your network status is perfect.
Blacklist Compile a blacklist to avoid devices added on the blacklist to access to your network, ensuring the safety of your personal information shared in the network. 1. Tap > Blacklist. 2. Tap on the top right corner and add clients or other devices to the blacklist.
Upgrade Your Deco TP-Link is dedicated to improving product features and providing a better customer experience. An up-to-date firmware provides better and more stable network performance. Always update your Deco to the latest firmware version when prompted in the Deco app. 1. Tap > Update Deco. 2. Download and install the firmware (if any) and follow app instructions to update your Deco to the latest version.
WPS WPS (Wi-Fi Protected Setup) helps you to quickly and securely connect a client to a network with a tap without entering any password. 1. Tap > WPS. 2. Tap the WPS icon in the Deco app and then on your client. 3. Your client has connected to the network successfully if shown as below.
Parental Controls Parental Controls allows you to filter content, limit time spent online and check internet history. Start by creating unique profiles for your family members. 1. Tap > Parental Controls. 2. Create unique profiles for family members. 3. Set filter level to block unappropriate contents. 4. Set daily time limits for the total time spent online.
QoS QoS (Quality of Service) helps you set priority for specific applications and devices, so that they can perform better with lower latency. 1. Tap > QoS. 2. Set the total bandwidth before using QoS. 3. Add devices you want to prioritize to guarantee a better network performance.
Advanced Features Additional features are available under the Advanced menu.
Modify LAN IP to avoid IP address confict. Change DHCP server settings. Enable IPTV/VLAN mode to support Enable MAC Clone if Deco fails to IPTV services. connect to the internet. Tip: For more about MAC Clone, refer to https://www.tp-link.
Reserve IP addresses for specific devices to recognize and manage the device more easily. Set up port forwarding rules to enable devices in your network accessible over the internet with safety. Register a TP-Link DDNS domain name to access your router and local servers using a domain name. Enable SIP ALG to communicate with SIP (Session Initiation Protocol) servers via NAT).
Enable UPNP to enable devices on your local network to dynamically open ports for applications such as multiplayer gaming. Enable Fast Roaming to allow your wireless devices to switch connection to different Decos. e m a sl ys eam esll Enable Beamforming to concentrate Wi-Fi signal towards connected devices for stronger connections. Toggle off LED to turn off the light on Deco. Configure the Night Mode to turn off the LED light at bedtime only.
Change the operating mode. Note: When the Deco works in Access Point mode, advanced features such as IPv4, Address Reservation, Port Forwarding, and DHCP server are not available. Set connection alerts to receive notifications once the clients connect to or disconnect from Deco. Set notifications to receive alerts in the notification bar.
Monthly Report Review the monthly usage statistics, such as security threats and total connected network devices each day. Tap > Monthly Report. View monthly reports. Enable or disable monthly report. Clear monthly report data.
Managers Add friends and family members to help manage your network. Each manager should have their own TP-Link ID. Tap > Managers, and follow app instructions to add other TP-Link ID account as manager. Then the manager can start to manage the network.
Authentication FCC Compliance Information Statement Product Name: AC1200 Whole Home Mesh Wi-Fi System Model Number: Deco M4R/Deco M4 Component Name I.T.E POWER SUPPLY Model T120100-2B1 Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.
• Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Compliance Information Statement Product Name: I.T.E POWER SUPPLY Model Number: T120100-2B1 Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY(the maximum transmitted power) 2412MHz—2483.5MHz (20dBm) 5150MHz—5250MHz (23dBm) EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863.
UKCA Mark UKCA declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UKCA declaration of conformity may be found at https://www.tp-link.com/support/ukca National restrictions Attention: This device may only be used indoors in Great Britain. UK Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s).
Caution: The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; Avertissement: Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; Radiation Exposure Statement: This equipment complies with IC radiation exposure limits
應避免影響附近雷達系統之操作。 安全諮詢及注意事項 • 請按照本產品注明的電源類型使用本產品。 • 注意防潮，請勿將水或其他液體潑灑到本產品上。 • • • • 清潔本產品之前請先切斷電源。請勿使用液體、噴霧清潔劑或濕布進行清潔。 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。 不要私自拆開機殼或自行維修，如產品有故障請與原廠或代理商聯繫。 限用物質含有情況標示聲明書 設備名稱： 型號（型式）： Equipment name: Type designation (Type) 單元 Restricted substances and its chemical symbols 鎘 六價鉻 多溴聯苯 AC1200 Whole Home Mesh Wi-Fi System Unit Deco M4 限用物質及其化學符號 鉛 Lead (Pb) PCB 外殼 電源供應器 其他及其配件 ○ ○ − − 汞 Mercury (Hg) ○ ○ ○ ○ Cadmium
備考1. 超出0.1 wt %” 及 “超出0.01 wt %” 系指限用物質之百分比含量超出百分比含量基準值。 Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 備考2.“○”系指該項限用物質之百分比含量未超出百分比含量基準值。 Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 備考3.
• Storage Humidity: 10%~90%RH, Non-condensing Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
