User manual

 WPA-Enterprise

Based on RADIUS server, WPA-Enterprise can generate different passwords for

different users and it is much safer than WPA-PSK. However, it costs much to maintain

and is more suitable for enterprise users. At present, WPA-Enterprise has two versions:

WPA-PSK and WPA2-PSK.

Figure 5-6 Security Mode_WPA-Enterprise

Version: Select one of the following versions:

 Auto: Select WPA-PSK or WPA2-PSK automatically based on the

wireless station's capability and request.

 WPA-PSK: Pre-shared key of WPA.

 WPA2-PSK: Pre-shared key of WPA2.

Encryption: Select the encryption type, including Auto, TKIP, and AES. The default

setting is Auto, which can select TKIP (Temporal Key Integrity Protocol)

or AES (Advanced Encryption Standard) automatically based on the

wireless station's capability and request. AES is more secure than TKIP

and TKIP is not supported in 802.11n mode. It is recommended to select

AES as the encryption type.

RADIUS Server

IP/Port:

Enter the IP address/port of the RADIUS server.

RADIUS

Password:

Enter the shared secret of RADIUS server to access the RADIUS server.

Group Key

Update period:

Specify the group key update period in seconds. The value can be either

0 or 30-8640000 seconds.

NOTE:

Encryption type TKIP is not supported in 802.11n mode. If TKIP is applied in 802.11n mode,

the clients may not be able to access the wireless network of the EAP. If TKIP is applied in

11b/g/n mode, the device may work at a low transmission rate.