Manualshelf

User manual

ManualsBrandsTP-LINK ManualsWLANWLAN access point 300 Mbit/s 2.4 GHz
51525354555657585960
48
Figure 7-7 Management Access Page
MAC
Authentication:
Check the box to enable MAC Authentication. After MAC
Authentication is enabled, only the PCs in MAC address list can log in
the device’s web management page. By default this function is
disabled. All PCs in LAN can log in and manage the device.
MAC1~MAC4: Enter the MAC addresses of the PCs which are authorized to log in the
device.
7.4 LED ON/OFF
function allows you to control the LED. When this function is enabled, you
can turn on/off the LED by pressing the LED button. When this function is disabled, the
LED button is invalid, and the LED is always off.
Following is the page of
.
Figure 7-8 LED ON/OFF
7.5 Wi-Fi Control
Following is the page of
. By default the Wi-Fi Control is disabled.