User manual

51
Following is the page of
SNMP
.
Figure 7-12 SNMP Page
SNMP Agent: Enable SNMP Agent and the SNMP Agent will collect the information of
this device and respond to information requests from one or more
management systems.
SysContact: Enter the textual identification of the contact person for this managed
node.
SysName: Enter an administratively-assigned name for this managed node.
SysLocation: Enter the physical location of this managed node.
Get
Community:
Community refers to a host group aiming at network management. Get
Community only has the read-
only right of the device's SNMP
information. The community name can be considered a group
password. The default setting is public.
Get Source: Defines the IP address (for example, 10.10.10.1) or subnet for
management systems that can serve as Get Community to read the
SNMP information of this device. The format of subnet is “IP
address/bit” (such as 10.10.10.0/24). The default is 0.0.0.0, which
means all hosts can read the SNMP information of this device.
Set
Community:
Set Community has the read and write right of the device's SNMP
information. Enter the community name that allows read/write access
to the device's SNMP information. The community name can be
considered a group password. The default setting is private.