Spec Sheet
Disclaimers
Wireless Speed, Range and Concurrent Devices Disclaimer
MU-MIMO Disclaimer
Seamless Roaming Disclaimer
Lightning and Electro-Static Discharge Protection Disclaimer
PoE Disclaimer
Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specications.
Range and coverage specications along with the number of connected devices were dened according to test
results under normal usage conditions. Actual wireless transmission rate, wireless coverage, and concurrent
devices are not guaranteed, and will vary as a result of 1) environmental factors, including building
materials, physical objects and obstacles, 2) network conditions, including local interference, volume and
density of trac, product location, network complexity, and network overhead and 3) client limitations, including
rated performance, location, connection quality, and client condition.
(for EAP265 HD / EAP245 / EAP225 / EAP225-Outdoor / EAP235-Wall / EAP230-Wall / EAP225-Wall)
MU-MIMO capability requires client devices that also support MU-MIMO.
(for EAP265 HD / EAP245 / EAP225 / EAP225-Outdoor)
Seamless roaming requires both the access point and client devices to support 802.11k and 802.11v
protocols.
(for EAP225-Outdoor / EAP110-Outdoor)
Protection against lightning and electro-static discharge may be achieved through proper product setup,
grounding and cable shielding. Refer to the instruction manual and consult an IT professional to assist with
setting up this product.
PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will
vary as a result of client limitations and environmental factors.
Some models featured in this guide may be unavailable in your country or region. Visit TP-Link website for local sales
information: www.tp-link.com. Specications are subject to change without notice.
© 2020 TP-Link