User Guide
Table Of Contents
- About this User Guide
- 1 Quick Start
- 2 Configure the Network
- 3 Monitor the Network
- 4 Manage the EAP
- 5 Configure the System
- 6 Application Example
41
Follow the steps below to configure Scheduler on this page:
1. In the Settings section, check the box to enable Scheduler and select the Association
Mode. There are two modes: Associated with SSID (the scheduler profile will be applied
to the specific SSID) and Associated with AP (the profile will be applied to all SSIDs on
the EAP). Then click Save.
2. In the Scheduler Profile Configuration section, click and the following
page will appear.
1 ) Click and specify a name for the prole to be created. Click OK. You
can create up to eight proles.