Manualshelf

User Manual

ManualsBrandsTP-LINK ManualsComputers & AccessoriesTP-Link AC1750 Wireless Wi-Fi Access Point (Supports 802.3AT PoE+, Dual Band, 802.11AC, Ceiling Mount, 3x3 MIMO Technology) (EAP245)
31323334353637383940
35
Configure Free Authentication Policy
Free Authentication Policy allows some specific clients to access the specific network
resources without authentication. For example, you can set a free authentication policy
to allow clients to visit the external web portal server before authenticated. In this way,
the clients can visit the login page provided by the web portal server and then pass the
subsequent authentication process.
Follow the steps below to add free authentication policy.
1. In the Free Authentication Policy section, click
to load the following page.
2. Configure the following parameters. When all the configured conditions are met, the
client can access the network without authentication.
Policy Name Specify a name for the policy.
Source IP Range Specify an IP range with the subnet and mask length. The clients in this
IP range can access the network without authentication.
Leaving the field empty means that clients with any IP address can
access the specific resources.
Destination IP
Range
Specify an IP range with the subnet and mask length. The devices in
this IP range can be accessed by the clients without authentication.
Leaving the field empty means that all devices in the LAN can be
accessed by the specific clients.