User's Guide
Table Of Contents
- About This User Guide
- 1 Quick Start
- 2 Configure the Network
- 3 Monitor the Network
- 4 Manage the EAP
- 5 Configure the System
- 6 Application Example
18
scan all EAPs in the same network segment, and find the IP address of the EAP. In the
following figure, for example, the IP address of the EAP is 192.168.0.5.
Tips:
Some EAP models only works with certain software version of Discovery Utility. If your Discovery
Utility can’t discover your EAP anyway, try a different software version.
2. To log in to the EAP, launch a web browser and enter the IP address of the EAP in the
address bar. The login page will appear. By default, both the username and password
are admin.
Tips:
To facilitate access to the EAP, you can set a static IP address for the EAP and remember it well or
write it down. But make sure that this IP address is not being used by other devices in the same LAN.
For detailed instructions about how to set a static IP address for the EAP, refer to
4.1 Manage the
IP Address of the EAP
.