User manual

Q1. Why can’t I pair the Music Receiver?

A. The Music Receiver is ready to be paired only when its LED turns white. Check the LED.

If it is oﬀ, re-plug the power cable or try another power outlet.

If it is blue, check your other paired devices and end the connection.

Q2. What can I do if my music does not come out from my stereo?

A1. Make sure your smart device and the Music Receiver are successfully connected, within 20

meters (66 feet) of each other, and within a direct line of sight. The Music Receiver will be

disconnected if your device's Bluetooth signal is blocked, interfered, or out of range for

longer than 5 minutes.

A2. Make sure your stereo and the Music Receiver are correctly connected via one of the

provided audio cables, and both are powered on.

A3. Make sure the volume on your music player and stereo are at an audible level.

Quick Start GuideHA100

Bringing Bluetooth to your home stereo

Bluetooth

Music Receiver

FAQ

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the

user may be required to take adequate measures.

1588

1. On the currently paired device, end the connection by:

Disabling Bluetooth or disconnecting TP-LINK_Music, or

Placing its back against the NFC Tag or Music Receiver (only for NFC-enabled

Android devices)

2. On another device, pair to the Music Receiver, then play and enjoy music!

Bonus Tips

After pairing a second device, you can restore connection of the former device to

enjoy music from them in turns. Simply pause music on one device and play on the

other one.

Note that audio may delay when switching from an iOS device.

Need more information?

Visit our website: www.tp-link.com

Play Music on Another Smart Device

PAGE 1
Play Music on Another Smart Device FAQ 1. On the currently paired device, end the connection by: Disabling Bluetooth or disconnecting TP-LINK_Music, or Placing its back against the NFC Tag or Music Receiver (only for NFC-enabled Android devices) 2. On another device, pair to the Music Receiver, then play and enjoy music! Q1. Why can’t I pair the Music Receiver? Bonus Tips After pairing a second device, you can restore connection of the former device to enjoy music from them in turns.
PAGE 2
Connect 1 Add Bluetooth to your home stereo as shown. The LED on the Music Receiver will turn white. Outlet Enjoy Pair 2 Music Receiver Method 1: Bluetooth pairing Method 2: NFC pairing (Only for NFC-equipped Android devices) 1. On your smart device, enable Bluetooth in Settings. 2. Pair TP-LINK_Music in the list of found devices. 1. On your Android device, enable NFC (Near Field Communication) in Settings. 2.