Quick Start Guide

Enjoy

Quick

Setup

1 Download TP-LINK Kasa app

HS100 / HS110*

*Smart Plug with Energy Monitoring.

SMART PLUG

2 Connect mobile device to your Wi-Fi network

3 Launch Kasa and follow the app instructions

Button

Press and hold until the Wi-Fi LED

blinks amber and green alternately (about 5

seconds) to initiate the App-Cong

process.

Press and hold until the Wi-Fi LED

blinks amber quickly (about 10 seconds) to

reset the Smart Plug to factory defaults.

| Quick Start Guide

Note: The Smart

Plug can only

connect to 2.4GHz

network.

PAGE 1
| Quick Start Guide SMART PLUG HS100 / HS110* *Smart Plug with Energy Monitoring. 1 Download TP-LINK Kasa app OR 2 Connect mobile device to your Wi-Fi network Note: The Smart Plug can only connect to 2.4GHz network. OR 3 Launch Kasa and follow the app instructions Quick Setup Enjoy Button Press and hold until the Wi-Fi LED blinks amber and green alternately (about 5 seconds) to initiate the App-Config process.
PAGE 2
LEDs Wi-Fi Blinking Amber and Green: App-Config mode initiated. Quick Blinking Green: Connecting to the network. Solid Green: Connected to the network. Quick Blinking Amber: Factory reset. Solid Amber: Rebooting. Solid Red: No network connection. Power Solid Green: The Smart Plug is switched on. Off: The Smart Plug is switched off. Frequently Asked Questions (FAQs) 1.