Installation Guide

Quick Start Guide

HS1XX Series

Smart Wi-Fi Plug Installation

Support

Create Account

Skip

Forgot password?

Password

Welcome

home

Sketch 9:41 AM 100%

OR scan

QR code

1 Download TP-LINK Kasa from App Store or

Google Play.

2 Connect mobile device to your 2.4GHz Wi-Fi

network.

3 Launch Kasa and follow the in-app instructions

to connect the Smart Plug to your network.

Note: The Smart Plug only supports 2.4GHz networks.

If you encounter any issues during installation or

configuration, please visit www.tp-link.com/support for

web support and troubleshooting information.

7106506290 REV 1.0.2

Sketch 9:41 AM 100%

Power up your Smart Plug

Plug in your Smart Plug.

The Wi-Fi light will turn solid amber.

Sketch 9:41 AM 100%

DONE

Great!

Your Smart Plug is all set up. It is

now saved in your Device List.

PAGE 1
Quick Start Guide HS1XX Series Smart Wi-Fi Plug Installation 1 Download TP-LINK Kasa from App Store or Google Play. OR scan QR code 2 Connect mobile device to your 2.4GHz Wi-Fi network. Note: The Smart Plug only supports 2.4GHz networks. 3 Launch Kasa and follow the in-app instructions to connect the Smart Plug to your network. Sketch 9:41 AM 100% Sketch 9:41 AM 100% Sketch 9:41 AM 100% Power up your Smart Plug Welcome home Plug in your Smart Plug.
PAGE 2
Smart Wi-Fi Plug Press and hold (for 5 seconds) until the Wi-Fi LED blinks amber and green alternately to initiate the App-Config process. Press and hold (for 10 seconds) until the Wi-Fi LED blinks amber rapidly to factory reset the Smart Plug. Blinking Amber and Green: App-Config mode initiated. Quick Blinking Green: Connecting to the network. Solid Green: Connected to the network. Quick Blinking Amber: Factory reset. Solid Amber: Rebooting. Solid Red: No network connection.