Installation Guide

Smart Wi-Fi Plug Mini

Troubleshooting

Press to turn the socket ON or OFF.

Press and hold (for 5 seconds) until the LED

flashes amber and blue alternately to initiate

the app onboarding process (SoftAP).

Press and hold (for 10 seconds) until the LED

flashes amber rapidly to factory reset the

Smart Plug Mini.

Flashing amber and blue: App onboarding

process (SoftAP) initiated.

Flashing blue rapidly: Connecting to the

network.

Solid blue: Connected to the network.

Flashing amber rapidly: Factory reset.

Solid amber: Rebooting or no network

connection.

Off: The socket is turned OFF or the Smart

Plug Mini is powered OFF.

1. What devices can I control with the Smart Plug Mini?

You can control lights, fans, humidifiers, portable heaters, and

any small appliances in accordance with the Smart Plug Mini’s

specifications.

2. What should I do when I can’t turn devices on or off using Kasa?

• Make sure the devices connected to the Smart Plug Mini are

switched to ON.

• Make sure the Remote Control feature in the app is enabled to

control your devices from outside of your home.

3. What should I do when the LED is lit a solid amber?

A solid amber light indicates no network connection. You can

troubleshoot the following:

• Check your network connectivity.

• Avoid placing the Smart Plug Mini near potential sources of

radio signal interference such as microwave ovens, cordless

phones, baby monitors, and motor-driven appliances.

• Repeat the app onboarding process.

• Factory reset the Smart Plug Mini and try to add it again.

4. How do I pair the Smart Plug Mini with Amazon Echo?

Visit www.tp-link.com/en/faq-944.html for pairing instructions.

LED