User’s Manual HS200 Smart Wi-Fi Light Switch 1910011729 REV 1.0.
Copyright & Trademarks Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Apple and App Store are trademarks of Apple Inc.
Contents 4 6 6 9 Introduction Product Requirements Smart Wi-Fi Light Switch Installation Using Kasa with Smart Switches 9 Kasa Account 10 Kasa Settings 10 Customizing Smart Switches 12 Scheduling 13 Creating Scenes 15 Away Mode 17 Runtime Summary 18 Maintaining the Smart Switches 18 Firmware Update 19 Resetting 21 Troubleshooting 21 Frequently Asked Questions 23 Usage Tips 23 Support 24 Specifications 25 Limited Warranty
User’s Manual Smart Wi-Fi Light Switch Introduction TP-LINK Smart Wi-Fi Light Switch is a standard, single-pole, wall light switch that can be controlled via your iOS or Android devices. Along with the TP-LINK Kasa mobile app, you can follow an intuitive wiring instructions provided to replace your standard inwall switch, connect the Smart Switch to your home network, then control your lights and create custom lighting automations from anywhere, at anytime with an Internet connection.
Smart Wi-Fi Light Switch User’s Manual Blinking Amber and Green: AppConfig mode initiated. Green: Lit up for about 30 seconds when successfully connected to the Wi-Fi network, then turn off. Blinking Amber: Resetting. Red: No Wi-Fi connection. White: Lit up when the light is switched OFF to show the Smart Switch location in the dark. RESTART RESET Press to reboot the Smart Switch. Press and hold (about 5 seconds) until the Wi-Fi status LED blinks amber and green alternately to initiate App-Config mode.
User’s Manual Smart Wi-Fi Light Switch Product Requirements • • • • • In-wall installation with hardwired connections. Neutral wire required. Single-pole light switch. The electrical box should be more than 2 inches deep. A smartphone or tablet running iOS 8 or higher; Android 4.1x or higher. A Wi-Fi connection (supports 802.11b/g/n standard).
Smart Wi-Fi Light Switch User’s Manual or your local electrical code. If you are unfamiliar with these codes and requirements, or are uncomfortable performing the installation, consult a qualified electrician. • The Smart Switch is an indoor single-pole switch that requires a neutral connection. • Do not install the Smart Switch with wet hands or when standing on wet or damp surfaces. 1 Download TP-LINK Kasa from App Store or Google Play. OR Scan QR code 2 Connect mobile device to your 2.
Smart Wi-Fi Light Switch User’s Manual 3 Remove the faceplate from the Smart Switch. Lauch Kasa and follow the wiring steps provided to instal and connect the Smart Switch to your home network. Sketch 9:41 AM 100% Welcome home Sketch 9:41 AM 100% Sketch 9:41 AM 100% Before we start Start the con guration Have you already wired up your Smart Switch? Locate the reset button below the switch on the left. Press and hold for 5 seconds until the Wi-Fi light blinks amber and green.
User’s Manual Smart Wi-Fi Light Switch Using Kasa with Smart Switches Kasa Account While you don’t have to have a Kasa account to use TPLINK Smart Home devices, signing up for an account provides added functionality such as: • Synchronization of settings and configurations to all your mobile devices. • Ability to control and configure the devices from outside your home. • Use of third-party services and products such as Amazon Echo. Devices can only be associated with one Kasa account.
User’s Manual Smart Wi-Fi Light Switch Kasa Settings Kasa Settings allows you to set your global preferences such as: • Remote Control to control your Smart Home devices outside of your home. You need to sign in to your Kasa account first to turn on this function. • Location and Time to set the location and time of where the Smart Home devices are located so that the Away Mode and Schedules can run on time.
Smart Wi-Fi Light Switch User’s Manual 9:41 PM 100% Device Settings DEVICE CONTROLS Remote Control Device Name Disabled Front Porch Switch Device Icon DEVICE TIME Time Zone San Francisco Location Device Time Sept 15, 2015 12:00 PM DEVICE INFO Model HS220 MAC Address 00:01:02:03:04:05 Hardware Version 1.0.0 Firmware Version 1.0.0 Delete Device 1. On the Devices screen, tap on the row of the Smart Switch to go to its controls. 2. Tap the (Settings) icon at the top-right corner. 3.
Smart Wi-Fi Light Switch User’s Manual Scheduling You can set up your lights to illuminate around your home at specific times on specific days of the week. 9:41 PM 100% 9:41 PM Schedules 100% Create Event At 4 5 6 7 8 No events yet! Add Events by tapping the button on the top right. Your saved event will be listed here. 5 5 0 0 0 : 8 9 0 1 2 am pm Turn my Smart Plug ON Repeating every S M T W CANCEL 1.
User’s Manual Smart Wi-Fi Light Switch You can create as many events as you like and edit them at any time from the Schedule screen. Creating Scenes Take full advantage of your TP-LINK Smart Home devices in your home with “Scenes”. A scene is a preset group of Smart Devices (such as Smart Plugs and Smart Switches) that can be customized and controlled simultaneously at the touch of a button from your smartphone or tablet to easily set your mood or fit any special occasion.
Smart Wi-Fi Light Switch User’s Manual 9:41 PM 100% Scenes Scenes let you set the mood of your home in one tap. Good Morning Good Night Get ready for the day by turning on your devices Turn everything off before bedtime 1. Movie Night Custom Dim the lights for showtime Create your own scene Scenes Devices On the main Home screen, tap the to switch to the Scenes view. (Scenes) tab 2.
Smart Wi-Fi Light Switch User’s Manual 9:41 PM Set Scene 100% Next BULBS Party Bulb 60% Bedroom Lamp SWITCHES Main Kitchen Lights ON Side Kitchen Lights OFF PLUGS ! Christmas Gnome PREVIEW Note that you must have at least one Smart Device in order to create a scene. Away Mode Away Mode allows you to automate your Smart Switches in combination with other Smart Home products to respond to your specific schedules.
Smart Wi-Fi Light Switch User’s Manual 9:41 PM 100% 9:41 PM Away Mode 100% Select Devices How about picking one light from each room? BULBS When you’re Away, your devices will turn on and off to simulate that someone is home. Party Bulb Schedules 2 Devices 3 Garage Light Living Room Bedroom Lamp PLUGS ! Christmas Gnome SAVE 1. Tap the Mode. (navigation drawer) and then Away 2. Tap Select Devices to select your Smart Home devices, and then tap Save. 3.
Smart Wi-Fi Light Switch User’s Manual 5. Tap Save. You can always toggle Away Mode on and off in the sidebar by tapping on the translucent button under the Kasa logo. Runtime Summary The Runtime summary provides a statistical information about how long the Smart Switch has been running. To view the Runtime summary, tap on the Runtime section in the Smart Switch’s details screen. 9:41 PM 100% Runtime TODAY Current Runtime 2.80 hrs Total Runtime 3.
Smart Wi-Fi Light Switch User’s Manual Maintaining the Smart Switches Firmware Update To keep the Smart Switches happy and up-to-date with all the latest improvement and fixes, we recommend that you update the firmware when updates are available. 9:41 PM 100% 9:41 PM 100% Firmware Update Updating firmware New Updates Available Please do not unplug your devices during We found available firmware updates for your reachable devices. the update. Smart Plugs Latest Version: 1.2.
User’s Manual Smart Wi-Fi Light Switch Remember: Only the Smart Switches that are currently reachable and have an available update will be shown in the Firmware Update screen. It is important to leave the Kasa app running while it finishes updating the Smart Switches. Try not to minimize the app, close the app, or interrupt the update to prevent problems. Resetting Resetting the Smart Switch can help you troubleshoot any issues you may have.
User’s Manual Smart Wi-Fi Light Switch The RESET button located underneath the Smart Switch has two functions: • Press and hold (about 5 seconds) until the Wi-Fi status LED blinks amber and green alternately to initiate App-Config mode. • Press and hold (about 10 seconds) until the Wi-Fi status LED blinks amber rapidly to reset the Smart Switch to factory defaults. Note that factory setting the Smart Switch will erase all of your custom settings, and you’ll have to set it up again. www.tp-link.
User’s Manual Smart Wi-Fi Light Switch Troubleshooting Frequently Asked Questions 1. What should I do when I can’t turn the Smart Switch on/off manually? If the Smart Switch doesn’t respond when pressing the physical switch: • Make sure that you restore power to the Smart Switch at the circuit breaker. • Make sure the Smart Switch is wired correctly. Please consult with a qualified electrician. 2.
User’s Manual Smart Wi-Fi Light Switch underneath the switch. • Factory reset the Smart Switch by pressing and holding the RESET button. You’ll need to reconfigure the Smart Switch again. 3. How far can I be and still able to control my lights via the Smart Switch? You can be anywhere in the world and still able to control your lights as long as you have an active Internet connection and Remote Control enabled. 4. Can I install two or more Smart Switches to control one light fixture? No.
User’s Manual Smart Wi-Fi Light Switch Usage Tips • Place the Smart Switch within the range of your WiFi router or access point (approximately 150 feet). • Avoid physical obstructions and radio interference in the surrounding area. Support Should you encounter any issues with the Smart Wi-Fi Light Switch, please visit our support page at www.tp-link.com/support for web support and troubleshooting information. www.tp-link.
Smart Wi-Fi Light Switch User’s Manual Specifications Height 4.13 in (10.5 cm) Width 1.75 in (4.45 cm) Depth 1.75 in (4.45 cm) Color White 3-Way No 4-Way No Locator Light Yes Number of Poles 1 Wall Plate Included Power 100-120 V ~ 50/60 Hz. Maximum Loads 600W incandescent. Operating Temp. 32o-104o F (0o-40o C) For indoor use only www.tp-link.
User’s Manual Smart Wi-Fi Light Switch Limited Warranty To learn more about the Limited Warranty for TP-LINK products, please visit www.tp-link.us/support/rma. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
User’s Manual Smart Wi-Fi Light Switch for compliance could void the user’s authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
User’s Manual Smart Wi-Fi Light Switch 1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
User’s Manual Smart Wi-Fi Light Switch 注意! 依據 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得 擅自變更頻率、加大功率或變更原設計之特性或功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通行;經發現有干擾 現象時,應立即停用,並改善至無干擾時方得繼續使用。前項合法通信,指依電信規 定作業之無線電信。低功率射頻電機需忍受合法通信或工業、科學以及醫療用電波 輻射性電機設備之干擾。 減少電磁波影響,請妥適使用。 安全諮詢及注意事項 • 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 • 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 • 注意防潮,請勿將水或其他液體潑灑到本產品上。 • 插槽與開口供通風使用,以確保本產品的操作可靠並防止過熱,請勿堵塞或覆蓋 開口。 • 請勿將本產品置放於靠近熱源的地方。除非有正常的通風,否則不可放在密閉位 置中。 • 請不要私自打開機殼,不要嘗試自行維修本產品,請由授權的專業人士進行此項 工作。
Smart Wi-Fi Light Switch User’s Manual to shut off the product; when there is no power button, the only way to completely shut off the power is to disconnect the product or the power adapter from the power source. • Don’t disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us. • Avoid water and wet locations.