User's Guide

12
Chapter 4
Set Up Internet Connection
4. 1. Use Quick Setup Wizard
The Quick Setup wizard will guide you through the process to set up your device.
Tips:
If you need the IPv6 internet connection, please refer to the section of Set Up an IPv6 Internet Connection.
Follow the steps below to set up your AP.
1. Visit
http://tplinkwifi.net, and log in with the password you set for your device.
2. Click
Quick Setup on the top of the page. Then follow the step-by-step instructions
to connect your device to the internet.
Note:
1. If you have changed the preset wireless network name (SSID) and wireless password during the Quick Setup process,
all your wireless devices must use the new SSID and password to connect to the device.
2. Once you complete the Quick Setup process, the device become your mesh Main AP, you can add agents to create
your mesh Wi-Fi system.
4. 2. Manually Set Up Your Internet Connection
In this part, you can check your current internet connection settings. You can also
modify the settings according to the service information provided by your ISP.
Follow the steps below to check or modify your internet connection settings.
1. Visit
http://tplinkwifi.net, and log in with the password you set for the AP.
2. Go to
Basic > Internet.
3. Select your internet connection type from the drop-down list.
Note:
If you are unsure of what your connection type is, please consult your ISP. Since different connection types may require
different cables and connection information, please refer to the demonstrations in Step 4 to determine your connection
type.
4. Follow the instructions on the page to continue the configuration. Parameters on the
images are used for demonstration only.
1 ) If you choose
Dynamic IP, you just need to click Save to make the settings
effective. Dynamic IP users are usually equipped with a cable TV or fiber cable.