User's Guide

Chapter 4

Set Up Internet Connection

5 ) If you choose PPTP, enter the Username and Password, and select the DNS

Address Mode

provided by your ISP. Different parameters are needed according

to the DNS address mode you selected.

5. Click Save to make the settings effective, and you can refer to Test Internet

Connectivity

to test if the internet connection works.

Note:

It may take 1-2 minutes to save the settings.

Tips:

1. You can check your internet connection by clicking Network Map on the left of the page.

2. If you use Dynamic IP and PPPoE and you are provided with any other parameters that are not required on the page,

please go to Advanced > Network > Internet to complete the configuration.

3. If you still cannot access the internet, refer to the FAQ section for further instructions.

4. 3. Set Up the AP as an Access Point

The AP can work as an access point, transforming your existing wired network to a

wireless one.

1. Visit

http://tplinkwifi.net, and log in with the password you set for the AP.