User's Guide

Chapter 4

Set Up Internet Connection

4. 4. Set Up an IPv6 Internet Connection

If your ISP provides information about one of the following IPv6 internet connection

types: PPPoE, Dynamic IP(SLAAC/DHCPv6), 6to4 tunnel and Static IP, you can manually

set up an IPv6 connection.

If your ISP provides an IPv4-only connection or IPv6 tunnel service, permit IPv6

connection by referring to

Set Up the IPv6 Tunnel.

1. Visit

http://tplinkwifi.net, and log in with the password you set for the AP.

2. Go to

Advanced > Network > Internet.

3. Select your WAN Interface Name (Status should be Connected) and click the (Edit)

icon.

4. Scroll down the page to enable

IPv6, and configure the IPv6 parameters.

• Addressing Type: Consult your ISP for the addressing type (DHCPv6, SLAAC

or AUTO). SLAAC is the most commonly used addressing type.

•

IPv6 Gateway: Keep it as the default setting.

Note:

If your ISP has provided the IPv6 address, click Advanced to reveal more settings.

5. Click OK and IPv6 service is available for your network now.