User's Guide

18
Chapter 5
Create Mesh Wi-Fi System
The Whole Home Mesh Wi-Fi System includes a Main AP, one or more agents. If you
have more than one mesh AP devices, you can add the remaining ones as agents to
create a mesh Wi-Fi system and extend your Wi-Fi coverage.
When the Quick Setup process is completed, your AP can be used as a Main AP of the
mesh network.
Please note that you can only add the AP device as agent when it is in factory default
settings.
¾ To add a agent to your network
• Method 1: Wireless Connection
1. Place the agent close to the Main AP and power it on, wait about two minutes until the
status LED turns to flashing blue.
2. Press the WPS button on the Main AP or the agent in your mesh
Wi-Fi system, and within two minutes, press the WPS button on your new agent.
Main AP
1
Agent
2
3. The status LED will flash blue fast for about two minutes during the synchronizing
process.
• Method 2: Wired Connection
1. Place the agent in an open area for best performance and power it on, wait about two
minutes for it to get ready for configuration.
2. Connect the LAN ports on the Main AP and the agent using an Ethernet cable .
3. The agent will automatically synchronize with the Main AP to extend your network.