User's Guide

Chapter 12

Customize Your Network Settings

1. Visit http://tplinkwifi.net, and log in with the password you set for the AP.

2. Go to Advanced > Network > LAN Settings page and select IPv4.

3. Scroll down to locate the

Address Reservation section and click Add to add an

address reservation entry for your device.

4. Enter the MAC Address of the device for which you want to reserve IP address.

5. Specify the IP address which will be reserved by the AP.

6. Keep the Enable This Entry check box selected and click OK to make the settings

effective.

12. 2. Configure IPv6 LAN Settings

Based on the IPv6 protocol, the AP provides two ways to assign IPv6 LAN addresses:

• Configure the RADVD (Router Advertisement Daemon) address type

• Configure the DHCPv6 Server address type

12. 2. 1. Configure the RADVD Address Type

1. Visit http://tplinkwifi.net, and log in with the password you set for the AP.

2. Go to

Advanced > Network > LAN Settings.

3. Select

IPv6 to configure IPv6 LAN parameters.