User's Guide

3
Chapter 1
Get to Know About Your DeviceDevice
1. 1. Product Overview
The Whole Home Mesh Wi-Fi AP is designed to extend your network coverage. You can
use multiple APs to create a seamless, intelligent and easy-to-configure mesh network
that covers the entire home.
The Mesh Wi-Fi system consists of a Main AP, one or more agents. The Main AP connects
to a wired router, a modem or gateway, the agents extend the wireless coverage of your
network.
1. 2. Appearance
The device has an LED that changes its behavior according to its working status, and a
WPS button, three RJ-45 Ethernet ports, a power port, and a RESET button.
WPS button
Status LED
Power slot
Reset Button
LAN PortsWAN/
LAN Port
You can check the device’s working status by following the LED Explanation table.
LED Explanation
Status Indication
Flashing yellow The device is starting up or resetting.
Yellow The connection quality between the main AP and agent is normal.
Flashing blue The device is ready for setup.
Fast flashing blue The device is establishing a WPS or mesh connection.
Blue The device has been set up, but the internet is unavailable.
Flashing white/green The device is upgrading the firmware.
White/green The device works well and the internet is available.
Flashing red The device has lost connection with the main AP.
Red The device has an issue.
Off Power is off, or the status LED is turned off.