User's Guide

Chapter 12

Customize Your Network Settings

1. Visit http://tplinkwifi.net, and log in with the password you

set for the AP.

2. Go to

Advanced > Network > IPv6 Tunnel.

3. Tick the check box, select

Map-T as the tunneling mechanism

and select a WAN connection from the drop-down list.

4. According to the parameters provided by your ISP, choose

Auto or Manual. More parameters are needed if you choose

Manual.

5. Click Save.

Note:

If there is no available WAN connection to choose, make sure you have

connected to the internet and the connection type is not Bridge.

Now you can visit the IPv6 websites with the Map-T tunnel.

Note:

If your ISP provides more parameters for Forwarding Mapping Rules, you can locate to FMR section and click Add to

configure and enable a FMR item.

Done!