User's Guide

Chapter 12

Customize Your Network Settings

3. Make sure the Enable WPS is turned on, and then click Connect.

4. Press the WPS button of the client device directly.

5. The status LED may flash blue fast for about 2 minutes during the WPS process.

Connect successfully will appear after the Connect button, which means the client

device has successfully connected to the AP.

Method 3: Enter the AP’s PIN on your client device

Use this method if your client device asks for the AP’s PIN.

1. Visit http://tplinkwifi.net, and log in with the password you set for the AP.

2. Go to Advanced > Wireless > WPS, locate the Router PIN section and select 2.4GHz

5GHz according to your needs.

3. Make sure the Enable Router’s PIN is turned on, and take a note of the current PIN

of the AP. You can also click the

Generate button to get a new PIN.

4. On the client device, enter the AP’s PIN. (The default PIN is also printed on the label

of the AP.)

5. The status LED may flash blue fast for about 2 minutes during the WPS process.

Note:

The WPS function cannot be configured if the wireless function of the AP is disabled. Please make sure the wireless

function is enabled before configuring the WPS.

Method 4: Enter the client device’s PIN on the AP

1. Visit http://tplinkwifi.net, and log in with the password you set for the AP.

2. Go to Advanced > Wireless > WPS, locate the WPS Settings section and select

2.4GHz or 5GHz according to your needs.

3. Make sure the

Enable WPS is turned on, and then select PIN Number.

4. Enter the client device’s PIN, and then click the Connect button.