User Guide Kasa Smart Wi-Fi Outdoor Plug KP400 1910012470 REV1.0.
Contents About This Guide····················································· 1 Introduction································································ 2 Appearance································································ 3 Set Up Your Smart Plug········································ 4 Main Device Controls············································ 5 Configure Your Smart Plug································· 6 Create Scenes·························································· 8 Discover
About This Guide This guide provides a brief introduction to smart outdoor plug and the Kasa app, as well as regulatory information. Please note that features of this product may vary slightly depending on the model and software version you have, and on your location, language and internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only.
Introduction Extend your smart home to the outdoors with the weather-resistant smart outdoor plug. Power on your patio lights, holiday decorations, and more from the convenience of your smartphone. Turn each outlet on/off individually, set schedules, even use simple voice commands with Alexa, Google Assistant, or Microsoft Cortana to control the devices connected to the plug. • Double the Outlets - Access and use 2 outdoor devices from anywhere together or individually with one smart plug.
Appearance This smart outdoor plug has two individual smart outlets, each with a control button to turn on or off the plug-in device and a LED to show you the current status. The System LED changes color according to different status. See the explanation below: System LED Orange Rebooting. Blinking Orange and Green Setup mode initiated. Blinking Green Searching for Wi-Fi. White Connected to Wi-Fi network successfully. Smart Outlet x 2 Plug in your device and control it from your smartphone.
Set Up Your Smart Outdoor Plug Follow the steps below to set up your plug via Kasa Smart app. 1. Download and install Kasa app Get the Kasa Smart app from the Apple App Store or Google Play, or by scanning the QR code below. 2. Log in or sign up with TP-Link ID Open the app, and log in with your TP-Link ID. If you don't have an account, create one first. 3. Add Device Tap the + button in the Kasa app, select Smart Outdoor Plug and then follow step-by-step app instructions to complete the setup.
Main Device Controls After you successfully set up your plug, you will see the home page of the Kasa app. Here you can view the status of all devices that you've added to Kasa and manage them. There are 2 smart outlets of this plug and you can tap on a smart outlet to control and manage.
Configure Your Smart Outdoor Plug On Device Status page, you can set Schedule, preset Away Mode, set Timer, check Runtime and change the settings of your smart outlets. Set Schedule Set Timer Preset Away Mode Tap Tap Tap to set a schedule for your smart outlet to simplify your daily routine by creating automatic On/Off action. to set the timer and your smart outlet will automatically turn on/off after the time ends.
Check Runtime View Device Settings Tap Tap to view and track runtime statistics. to view and change the settings of your device.
Create Scenes A scene is a preset group of smart devices that can be programmed, customized and activated simultaneously at the touch of a button from your smartphone or tablet, allowing you to easily set your mood, activity or fit any special occasion. This page allows you to preset how your smart home devices should act automatically at special occasions.
Discover Kasa Use the Kasa app to pair your plug with Amazon Alexa, Google Home Assistant or Microsoft Cortana and enjoy a full hands-free experience. IFTTT support makes it easy to set interactions between a whole host of products. Launch the Kasa app and go to Add Device > WORKS WITH KASA > Nest Home and Away / Amazon Alexa / Google Assistant / IFTTT for detailed instructions.
Authentication COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2019 TP-Link Technologies Co.
FCC Compliance Information Statement Product Name: Kasa Smart Wi-Fi Outdoor Plug Model Number: KP400 Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
NCC Notice 注意！ 依據 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性或功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通 信，指依電信規定作業之無線電信。低功率射頻電機需忍受合法通信或工業、科學以及醫療用電波輻射性電機設備之干擾。 BSMI Notice 安全諮詢及注意事項 • 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 • 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 • 注意防潮，請勿將水或其他液體潑灑到本產品上。 • 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。 • 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。 • 請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。 限用物質含有情況標示聲明書 產品元件名稱 鉛 Pb 鎘 Cd 限用物質及其化學
Safety Information • Do not attempt to disassemble, repair, or modify the device. • Do not use the device where wireless devices are not allowed. • Operating Temperature: -20℃~50℃ (-4℉~122℉) • Operating Humidity: 10%~90%RH, Non-condensing • Storage Humidity: 5%~90%RH, Non-condensing • For outdoor usage, use this product with ground fault circuit interrupter (GFCI) outlet. • Risk of electric shock. Do not open. No user serviceable parts inside. • Refer servicing to qualified service personnel.
• DO NOT clean with liquid • DO NOT exceed the recommended electrical ratings Explanation of the symbols on the product label Symbol Explanation AC voltage RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
