Quick Start Guide

Smart Wi-Fi LED Bulb Installation

Quick Start Guide

LB1XX Series

Important Information

Before installing or replacing the Smart Bulbs, read and follow all precautions,

including the following:

• WARNING: RISK OF ELECTRIC SHOCK OR BURNS. Switch OFF the light

switch controlling the bulb and WAIT for the bulb to cool down before

attempting to change it.

• Do not install the Smart Bulb with wet hands or when standing on wet or

damp surfaces.

• Not suitable for use with standard in-wall dimmers. Dimmable via the app

only.

• Suitable for use in operating environment between -20°C and 40°C (-4°F and

104°F).

• NOT FOR EMERGENCY LIGHTING.

1 Download TP-LINK Kasa from App Store or

Google Play.

2 Connect mobile device to your 2.4GHz Wi-Fi network.

Note: The Smart Bulbs only support 2.4GHz networks.

3 Launch Kasa and follow the in-app instructions to

connect the Smart Bulb to your home network.

Scan QR

code

7106506484 REV 1.0.1

Create Account

Skip

Forgot password?

Password

Welcome

home

Sketch 9:41 AM 100%

DONE

Great!

Your Smart Bulb is all set up. It is

now saved in your Device List.

Sketch 9:41 AM 100%

Install your Smart Bulb

First, make sure the power is off on

the light you’re replacing. Swap the

current bulb with your Smart Bulb.

PAGE 1
Quick Start Guide LB1XX Series Important Information Before installing or replacing the Smart Bulbs, read and follow all precautions, including the following: • WARNING: RISK OF ELECTRIC SHOCK OR BURNS. Switch OFF the light switch controlling the bulb and WAIT for the bulb to cool down before attempting to change it. • Do not install the Smart Bulb with wet hands or when standing on wet or damp surfaces. • Not suitable for use with standard in-wall dimmers. Dimmable via the app only.
PAGE 2
Frequently Asked Questions 1. The Smart Bulb appears offline or unreachable, what should I do? • Check the light switch and make sure that it’s switched to ON. The Smart Bulb requires an “always-on” power supply to operate properly. • Make sure you are connected to the same Wi-Fi network to control it locally. To control the Smart Bulb outside of your home, sign in to your Kasa account and enable Remote Control. • Reset the Smart Bulb and reconnect it to your Wi-Fi network. 2.